THERMAL PROTECTION AND ACCESSORIES
AN AUTO RESET THERMAL PROTECTOR HAS BEEN DESIGNED INTO YOUR CLEANER TO
PROTECT IT FROM OVERHEATING. WHEN THE THERMAL PROTECTOR ACTIVATES THE
CLEANER SUCTION MOTOR WILL STOP RUNNING.
IF THE VACUUM STOPS RUNNING PROCEED AS FOLLOWS:
1. TURN THE CLEANER OFF AND REMOVE BATTERY PACK
IMPORTANT:
IF LEFT TURNED ON, THE CLEANER MOTOR MAY RESTART
UNEXPECTEDLY.
2. EMPTY DIRTY WATER TANK.
3. INSPECT THE BRUSHES FOR ANY OBSTRUCTIONS. CLEAR OBSTRUCTIONS IF
PRESENT.
4. AFTER THE MOTOR COOLS FOR 30 MINUTES, THE THERMAL PROTECTOR WILL
DEACTIVATE AND CLEANING MAY CONTINUE. (REINSTALL THE BATTERY PACK.)
IF THE THERMAL PROTECTOR CONTINUES TO ACTIVATE AFTER FOLLOWING THE ABOVE
STEPS, CONTACT CUSTOMER SERVICE AT 800-406-2005.
THIS PRODUCT CONTAINS NO SERVICEABLE PARTS.
IF APPLIANCE IS NOT WORKING AS IT SHOULD, HAS BEEN DROPPED, DAMAGED, LEFT OUTDOORS, OR
DROPPED INTO WATER, CALL CUSTOMER SERVICE AT 1-800-944-9200 PRIOR TO CONTINUING USE.
14
Look for these accessories on Hoover.com or Hoover.ca or call 800-406-2005.
Every ONEPWR
battery works with every ONEPWR
TM
Battery:
2.0 Ah
3.0 Ah
3.0 Ah MAX
4.0 Ah
4.0 Ah MAX
6.0 Ah
Parts and Accessories:
Charger
Dry Use Filter
Solution Tank
Recovery Tank
Recovery Tank Lid Assembly
Removable Nozzle Assembly
FloorMate Jet™ Multi-purpose Brush Roll
FloorMate Jet™ Gentle Brush Roll
FloorMate Jet™ Scrubbing Brush Roll
product.
TM
Model #
BH15020
BH15030
BH25030
BH15240
BH25040
BH15260
BH05000
AH45201
440013915
440013917
440013918
440013920
AH55201
AH55202
AH55203