Broan best IS241 Mode D'emploi page 6

INSTALLATION OF GLASS
FRAME
1. Insert the transparent plastic gasket along
the edges of the glass.
2. Insert the glass, from the top to the bottom,
in the blowet unit and fix it to that one by
means of the three squares and the six
screws which have been supplied. The
squares must be fixed on the side of the
blower unit which has not got controls.
ATTENTION: Not to break the glass, it's of
much importance for the plastic gasket to
cover every part of glass frame and that the
glass is not directly in contact with metal.
Glass frame appliances are part of a
prestigious range of hand crafted cooker
hoods; due to the particular steps of
processing the glass is subjected to, the
glass body could present some deffects and
distortion.
Please be very carefull not to hit the glass
with any objects made of porcelain, metal,
glass or anything else that is very heavy.
CONNECT DUCTWORK
1. Now near the hood to the lower part of the
support frame and connect the duct to the
duct collar.
2. Use 6" round metal duct to connect the
duct collar on the hood to the ductwork
above.
3. Use duct tape to make all joints secure and
air tight.
GLASS
METAL
BRACKETS
DUCT
6"
- 6 -
PLASTIK
GASKET
BLOWER UNIT
METAL
BRACKETS
DUCT
COLLAR