Publicité
Les langues disponibles
Les langues disponibles
8. ATTENTION: Since the position of the lower
part of the support frame establishes the final
position of the hood controls, turn the lower
part 90° at a time before finally fixing, in order
to obtain the required position.
Remember that in relation to the support
frame, the controls must always be in the
position indicated.
TYPICAL SUPPORT FRAME MOUNTINGS
CONNECT DECORATIVE FLUE
1. Secure the upper flue section to the brackets
of the support frame with the screws
supplied.
2. Insert the lower flue section pushing it
upwards, and make it turn as far as the hole,
which has been made in the lower flue
section, is found available through its lower
opening. Partly screw one screw in the hole
and temporarily put the lower flue section
on this one. When making such operation
mind that the packing is not damaged.
BRACKET
OF THE
SUPPORT
FRAME
UPPER
FLUE
SECTION
LOWER
FLUE
SECTION
- 5 -
Publicité
