Publicité
Les langues disponibles
Les langues disponibles
Economy mode (continued)
The Economy mode has two periods which you can set as follows:
Period
Temperature
Set to a comfortable level
1
(e.g., 22°C).
Set to an economical level
2
(e.g., 16.5°C).
The Economy mode can be used as follows:
Place the thermostat in Economy mode during your absence.
•
When you arrive, place the thermostat in Automatic mode or in Manual
•
mode before the temperature drops to the economy level.
When you leave, switch the thermostat back to Economy mode.
•
To program the two periods of the Economy mode:
1. Press the Mode button until Econo appears on the screen.
2. Press the Pgm button. Period 1 is displayed.
3. Press the Day button to set the start day of the displayed period.
4. Press the Hour and Min buttons to set the start time of the displayed period.
5. Press the Up or Down button to set the temperature.
6. Press the Pgm button to select Period 2.
7. Repeat steps 3 through 5 to set Period 2.
8. Press the Ret button to end programming.
Temporary Override
You can temporarily override the current temperature using the Up or Down
button. The new setpoint will be used until the end of the current period. Econo
flashes during the override.
Power outage
During a power outage, the thermostat display remains lit for the first 2
minutes. During this time, the LP (low power) indicator appears and all
buttons are disabled. Then the screen turns blank. The settings are stored
in memory. When power returns, the thermostat returns to the mode of
operation preceding the power outage. If the power failure has exceeded 5
hours, the clock and date must be re-adjusted.
Set the day and time that you want the temperature
to start rising so that the comfortable level is reached
by the time you arrive (e.g., Friday at 3:00 pm).
Set the day and time that you want the temperature
to start dropping to the economy level if you do not
show up (e.g., Friday at 8:00 pm).
7
Start Time
Publicité
