Publicité
Les langues disponibles
Les langues disponibles
Clock and day setting
The clock must be set when Time appears on the screen.
1. Pull the cover down.
2. Press the Day button to set the day.
3. Use the Hour and Min buttons to set the clock.
4. Press the Ret button to exit.
Temperature display and setting
The thermostat normally displays the room (measured) temperature.
To display the set temperature (setpoint), press the Up or Down button once.
•
The setpoint temperature will remain on the screen for 5 seconds.
To change the setpoint temperature, press the Up or Down button repeatedly
•
until the desired temperature is displayed.
The screen is backlit for 12 seconds when any button is pressed.
•
Automatic mode
To place the thermostat in Automatic mode, press the Mode button
until Auto appears on the screen. The current period number also
appears.
In this mode, the thermostat follows the programmed schedule.
You can program up to 4 periods in a day. You can set 2 different
programs: one for the weekdays (Monday to Friday) and another one
for the weekend (Saturday and Sunday).
By default, the thermostat is programmed with the following schedule:
Period
1
Wake
2
Leave
3
Return
4
Sleep
Temporary Override
You can temporarily override the current temperature using the Up or Down
button. The new setpoint will be used until the end of the current period.
During the override, Auto flashes on the screen.
Monday to Friday
Start Time
Temperature
6:00
21.0 °C (70 °F)
8:00
16.5 °C (62 °F)
18:00
21.0 °C (70 °F)
22:00
16.5 °C (62 °F)
Saturday & Sunday
Start Time
6:00
--:--
--:--
22:00
5
Temperature
21.0 °C (70 °F)
- -
- -
16.5 °C (62 °F)
Publicité
