Klarstein CLEANBUTLER 3G TURBO Mode D'emploi page 17

COMMISSIONING AND OPERATION
Attaching / removing the vacuum cleaner tube
1. Insert the end of the vacuum cleaner tube into the opening in the housing.
When you hear a clicking sound, the vacuum cleaner tube is properly
connected to the housing.
2. If you want to remove the vacuum cleaner tube, press the release button on
the vacuum cleaner tube with one hand. At the same time, hold the vacuum
cleaner tube with the other hand and pull it out of the housing opening.
Attaching / removing the floor brush
1. Insert the other end of the vacuum cleaner tube into the opening of the floor
brush. When you hear a clicking sound, the vacuum cleaner tube is properly
connected to the floor brush.
2. If you want to remove the vacuum cleaner tube, press the release button on
the floor brush with one hand. At the same time, hold the vacuum cleaner
tube with your other hand and pull it out of the opening in the floor brush.
EN
17