Sigma ROX GPS 11.0 Mode D'emploi page 16

To transfer the Strava segments, please connect your ROX GPS 11.0 to the
DATA CENTER. The most important information on your device will appear on the
dashboard. Here you have the option now to transfer the marked segments on Strava
onto your ROX GPS 11.0 by a click.
8. Workout
Workouts are predefined training processes which are described by means of training
phases. The workouts offer the maximum flexibility. If you want to perform a simple
training with a target zone, you define a simple phase with the appropriate target zone.
Workouts cannot be set on the ROX GPS 11.0 itself. These must be created via the
SIGMA DATA CENTER and then transferred.
9. Memory
9.1 Activities
You will find all values of your activities sorted by date. The most recent activity first.
10. Settings
All important functions can be set either directly on the ROX GPS 11.0 or on the PC and
then transferred to the ROX GPS 11.0.
NOTE
To enable this altitude, you must select the preset altitude in training! To select the
altitude, open the shortcut menu by holding down the PLUS button. Training views can
only be set via the DATA CENTER.To get "smart notifications" while riding, you need to
connect your smartphone to the ROX GPS 11.0. To do this, select the item CONNECT
PHONE.
10.1 Firmware update
The ROX GPS 11.0 can be updated. If a new firmware version is available, you will be
informed via the DATA CENTER. Follow the steps as described in the DATA CENTER.
ATTENTION
Back up all your data BEFOREHAND. With a firmware update, all data will be lost and
CANNOT be restored!
10.2 Restoring factory settings
If you want your ROX GPS 11.0 to be reset to the original state, select this item and
follow the directions.
16
IMPORTANT
Only the Strava segments that have been
marked as favourites on www.strava.com
are transferred!