Dmx-Protocol - Evolite Evo Wash 740z Strip Mode D'emploi

Wired DMX mode :
Press the MENU key and then DOWN to access the next menu. Then press ENTER then DOWN to reach
the Signal Set menu. Press ENTER and then check the DMX Cable box. Confirm this choice by pressing
ENTER.
Press the MENU key and then UP to go to the first menu. Press ENTER to select the Dmx Address menu.
Use the UP & DOWN keys to select the DMX address of the device. Press ENTER to confirm your choice.
Finally, press MENU 2 times to return to the main menu. The unit is in DMX mode, and if no DMX signal
is present, the display flashes. Then connect a DMX cable as input.
DMX mode selection via W-DMX (wireless):
In the Signal Set menu, check the WDMX & CAB box. This mode activates the W-DMX receiver. When
the devices communicate with each other, the transmitting device flashes red and the receiver (s)
flashes green.
The LED is off: no connection.
The LED flashes green quickly: the connection to the transmitter has been lost.
The LED flashes green slowly: The connection to the transmitter is established, but there is no DMX
signal.
The LED is fixed green: The connection and the DMX signal are effective.
o DMX Protocol
Mode/Channel
59 31 25
1 1 1
2 2 2
3 3 3
4 4 4
5 5 5
6 6 6
7 7 7
8 8 8
9 9 9
10 10 10
Evo Wash 740z Strip User's Manual Ver. 1.00
Value
0..255
0..255 Fine control of Pan movement
0..255
0..255 Fine control of Tilt movement
0..225
226..235
236..255
0..255
0..31
32..63
64..95
96..127
128..159 Pulse-effect in sequences slow to fast
160..191
192..255
0..255 0-100% Red dimmer from dark to bright
0..255 0-100% Green dimmer from dark to bright
0..255 0-100% Blue dimmer from dark to bright
Function
Pan
PAN Movement
Pan-fine
Tilt
Tilt Movement
Tile-fine
Speed pan/tile
max to min speed
blackout by movement
no function
Dimmer
Dimmer 0%...100%
Shutter
Shutter closed
shutter open
Strobe effect slow to fast
shutter open
shutter open
shutter open
Red
Green
Blue
White
27
Page