MOB MO8735 Mode D'emploi page 2

MO8735
EN
Power Bank
1. Charging electronic digital equipment:
Please use the original cable of your electronic digital products for
connection. The power bank will automatically charge up your
electronic digital products once they are connected to each
other. (Please make sure the power bank is charged for best
performance.)
Unplug the charging cable after the digital product is fully
charged.
Caution: The output power of the power bank is 5V/1A, please
check input specification of your product before charging with
the power bank.
2. Check battery capacity in power bank:
Press the button to check if the power bank needs to be
recharge. The Blue LED lights indicate battery capacity
remaining in the power bank as follows – 4 lights = 100%; 3
lights = 75%; 2 lights = 50%; 1 light = 25%
3. Charging power bank:
Connect the power bank with a DC USB port. Plug the micro
USB cable to the power bank to recharge. The blue indicator
light will flash when charging in progress. The indicator lights
are permanently lit when the power bank is fully charged.
Specification:
Input:
Output:
Capacity:
Power efficiency: 70%
Charging time:
Cycle life:
- When connecting the power bank to the device, please use
cables/ connectors provided from the authorized maker. The
use of cables or connectors from an unauthorized maker may
cause severe or fatal injuries and property losses, and damage
to the product and the device.
DC5V/1A
5V/1A
4000mAh
4-5 hours approximately
500 times