Maintenance; To Order - Chauvin Arnoux C.A 832 Notice De Fonctionnement

For maintenance, use only specified spare parts. The manufacturer cannot
be held responsible for any accident following a repair performed
independently of its customer support department or authorised servicing
centres.
6.1

Maintenance

6.1.1 Battery replacement
• Set the switch to OFF
• Remove the cover from the rear of the unit.
• Replace the dead battery by a 9V (type 6LR61 ou 6LF22).
6.2 Cleaning the casing
Clean the casing using a cloth slightly soaked with soapy water. Rinse
using a humid cloth.
Do not use solvents.
6.3 Metrological Checks
It is essential that all measuring instruments are regularly
calibrated.
For checking and calibration of your instrument, please contact
our accredited laboratories (list on request) or the Chauvin
Arnoux subsidiary or Agent in your country.
6.4 Repairs
Repairs under or out of guarantee: please return the product to
your distributor.
C.A 832......................................................................P01.1855.01Z
Delivered with shockproof sheath, protective foam microphone cap,
screwdriver, male Jack connector, assembly screw for photo stand, 9V
battery and this operator's manual.
Spares:
9V battery.....................................................................P01. 1007.32
Accessory:
Calibrator for sound level meter C.A 833...........................P01. 1853. 01
6. MAINTENANCE

7. TO ORDER

16