Getting Help; General Description; Display - EXFO FOT-10A Manuel D'instructions

G D
ENERAL ESCRIPTION

1.4 Getting Help

Our Customer Service Group is available in North America from 7:30 a.m. to 8:00 p.m.
(Eastern Standard Time), Monday to Friday.
EXFO Electro-Optical Engineering
(Corporate Headquarters)
465 Godin Avenue
Vanier QC G1M 3G7
Canada
EXFO Europe
Centre d'Affaires Les Metz
100, rue Albert Calmette
78353 Jouy-en-Josas, France
2 G D
ENERAL ESCRIPTION
The FOT measures optical power (FOT-10A, FOT-20A, and FOT-30A) and loss
(FOT-20A and FOT-30A) at 5 precalibrated wavelengths in multimode and
singlemode fibers. A 2 kHz signal detection feature is also included for fiber
identification. The FOT-30A can be configured with a single- or dual-wavelength LED
or laser source.
The FOT is powered by the 9 V alkaline battery or the AC adapter/charger.

2.1 Display

Source wavelength (FOT-30A)
AC adapter/charger
operation
9 V battery operation
Low battery
1. Pre-calibrated wavelengths depend on detector type (Si: 650, 780, 820, 850, and 910 nm;
Ge/GeX: 780, 850, 1300, 1310, and 1550 nm).
1 800 663-3936 (USA & Canada)
Tel.: (418) 683-0211
Fax: (418) 683-2170
support@exfo.com
www.exfo.com
Tel.: 33-1 34 63 00 20
Fax: 33-1 34 65 90 93
Power meter wavelength in nm
2 kHz signal detection
Reference value in dBm
(FOT-20A and FOT-30A)
SOURCE METER
AC
1300
1310
dBm
850 1550
9V
dBm
mW
low
nW
bat
Absolute power in dBm (or W in FOT-20 and FOT-30A)
Relative power in dB (FOT-20 and FOT-30A)
Continuous wave (CW)
output signal activated
nm
Hz CW
(FOT-30A)
2 kHz output signal
2kHz
activated (FOT-30A)
W
auto
off
Auto-off function activated
2
1