Publicité
Les langues disponibles
Les langues disponibles
AUTOMATIC MODE SETTINGS
E Zone settings (SET ZONE)
1
Select "SET ZONE", and then tilt the
joystick lever to c.
The zone setting screen will be displayed.
2
Setting a zone number
Select "ZONE No.", and then tilt the
joystick lever to c.
The "ZONE No." setting will flash.
·ZONE
TITLE: 0000000000000000
SET LEFT LIMIT
SET RIGHT LIMIT
DELETE
DEFAULT SPEED :
RUN
BACK
Tilt the joystick lever to j or l to select
3
the zone number, and then tilt it to d.
Available settings: 001–008
4
Setting a name
Select "TITLE", and then tilt the joystick
lever to c.
The "TITLE" setting will flash.
5
Enter the zone name.
Tilt the joystick lever to j or l to change each
character, and tilt it to d or c to move the flashing
cursor to a different position.
Tilt the joystick lever to d and hold it there until
displayed. This completes the setting.
Available settings: 0–9, A–Z, a–z, blank
6
Setting the left edge
1
Select "SET LEFT LIMIT", and then tilt the joystick
lever to c.
The "CALL PRESET 1 TO CONFIRM ......" screen will
be displayed.
ZONE
No.
:
001
TITLE: 0000000000000000
·SET LEFT LIMIT
SET RIGHT LIMIT
DELETE
DEFAULT SPEED :
001
CALL PRESET 1 TO
CONFIRM......
2
Tilt the joystick lever to the left to confirm.
3
After making the setting, press the "1" numeric
button, and then press the ENTER button.
7
Setting the right edge
1
Select "SET RIGHT LIMIT", and then tilt the
joystick lever to c.
No.
:
001
001
1
The "CALL PRESET 1 TO CONFIRM ......" screen will
be displayed.
ZONE
TITLE: 0000000000000000
SET LEFT LIMIT
·SET RIGHT LIMIT
DELETE
DEFAULT SPEED :
CALL PRESET 1 TO
CONFIRM......
2
Tilt the joystick lever to the right to confirm.
3
After making the setting, press the "1" numeric
button, and then press the ENTER button.
Setting the zone mode speed
8
Select "RUN" and then set the speed that is to be used
only when using the zone mode.
1
Select "DEFAULT SPEED", and then tilt the
joystick lever to c.
The "DEFAULT SPEED" setting will flash.
2
Tilt the joystick lever to j or l to set the value,
and then tilt it to d.
Available settings:
9
Select "BACK", and then tilt the joystick
lever to c to complete the setting.
·
is
Select "SET ZONE", and then tilt the
1
joystick lever to c.
The zone setting screen will be displayed.
2
Select "ZONE No.", and then tilt the
joystick lever to c.
The "ZONE No." setting will flash.
Tilt the joystick lever to j or l to select a
3
zone number to be started, and then tilt it
to d.
4
Select "RUN", and then tilt the joystick
lever to c.
ENTER
The selected zone mode will start.
To stop the zone mode, use the joystick lever of the
system controller.
NOTE: If you create a new zone area that overlaps an
existing zone area, the new area will have priority
when the overlapped section is monitored.
5
Select "BACK", and then tilt the joystick
lever to c to complete the setting.
- 38 -
No.
:
001
001
(slow) –
„
… ˆ ˆ
Starting a zone mode
ZONE
No.
:
001
TITLE: 0000000000000000
SET LEFT LIMIT
SET RIGHT LIMIT
DELETE
DEFAULT SPEED :
001
·RUN
BACK
1
ENTER
seconds (fast)
English
Publicité
