Sanyo VCC-9000EBCP Manuel D'instructions page 30

PAN AND TILT SETTINGS
A Settings using joystick
operations (AUTO STOP IDLE)
Press the MENU button.
1
MENU
Tilt the joystick lever to j or l to select
2
"PAN/TILT PARAMETERS", and then tilt it
to c.
3 Select "AUTO STOP IDLE", and then tilt the
joystick lever to c.
The "AUTO STOP IDLE" setting will flash.
·AUTO STOP IDLE
PROPORTIONAL PAN:ON
SET NORTH
BACK
Tilt the joystick lever to j or l to select
4
the joystick sensitivity, and then tilt it to d.
Available settings: OFF, 001–255 (fast)
Select "BACK", and then tilt the joystick
5
lever to c to complete the setting.
NOTE: This should normally be left at "020" (default setting).
If you change the setting, the joystick lever may not
operate correctly.
English
SYSTEM INFORMATION
LENS
CAMERA
·PAN/TILT PARAMETERS
AUTO MODE
PRIVACY MASK
END
:020
B Panning speed settings for
different zoom rations
(PROPORTIONAL PAN)
1 Select "PROPORTIONAL PAN", and then
tilt the joystick lever to c.
The "PROPORTIONAL PAN" setting will flash.
AUTO STOP IDLE
·PROPORTIONAL PAN:ON
SET NORTH
BACK
Tilt the joystick lever to j or l to change
2
the setting, and then tilt it to d.
Available settings: OFF, ON
Select "BACK", and then tilt the joystick
3
lever to c to complete the setting.
- 29 -
:020