MENU EXPLANATIONS
The menu settings are divided into six
sub-menus.
Main menu
SYSTEM INFORMATION
LENS
CAMERA
PAN/TILT PARAMETERS
AUTO MODE
PRIVACY MASK
·END
NOTE:
The menu screens are cleared
automatically if no menu operations are
carried out for two minutes or more.
Press the MENU button to re-display
them.
Menu settings are all stored
automatically in case of problems such
as power outages.
If you tilt the joystick lever vertically and
hold it in that position, the
automatically moves up or down.
Furthermore, if you tilt and hold the
joystick lever for 10 seconds or more
while changing a setting, the speed at
which the setting changes will increase.
English
SYSTEM SETTINGS (SYSTEM INFORMATION) (See p16)
LENS SETTINGS (LENS) (See p21)
CAMERA SETTINGS (CAMERA) (See p25)
·
position
PAN AND TILT SETTINGS (PAN/TILT PARAMETERS) (See p28)
AUTOMATIC MODE SETTINGS (AUTO MODE) (See p31)
MASKING SETTINGS (PRIVACY MASK) (See p40)
CAMERA INFORMATION
DISPLAY CONFIGURATION
PASSWORD CHANGE
FACTORY DEFAULT
RESET
·BACK
ZOOM SPEED
:HIGH
EL ZOOM
:OFF
JOYSTICK AUTO
:BOTH
AUTO FOCUS
:005
AUTO IRIS
:005
IRIS LEVEL
:040
DAY/NIGHT
:AUTO
·BACK
SENSE UP
:OFF
SHUTTER
:OFF
WHITE BALANCE :ATW
BLC
:OFF
·BACK
AUTO STOP IDLE
:020
PROPORTIONAL PAN:ON
SET NORTH
·BACK
PRESET POSITION
SEQUENCE
TOUR
AUTO PAN
SET ZONE
FUNCTION IDLE :OFF
FUNCTION
:OFF
·BACK
MASK No. :
001
SET
ACTIVATE :
OFF
·BACK
- 15 -
A Camera ID settings and title settings
(CAMERA INFORMATION)
B Screen display settings (DISPLAY
CONFIGURATION)
C Changing the password
(PASSWORD CHANGE)
D Restoring camera settings to their default
settings (FACTORY DEFAULT)
E Resetting settings (RESET)
A Zoom speed settings (ZOOM SPEED)
B
Electronic zoom maximum ratio settings
(EL ZOOM)
C
Automatic restore mode settings
(JOYSTICK AUTO)
D Automatic focus restore time settings
(AUTO FOCUS)
E Automatic iris restore time setting
(AUTO IRIS)
F Iris level settings (IRIS LEVEL)
G Day/Night settings (DAY/NIGHT)
(VCC-9100P series only)
A Sensitivity increase settings (SENSE UP)
B Shutter speed setting (SHUTTER)
C White balance settings (WHITE BALANCE)
D Backlight compensation settings (BLC)
A
Settings using joystick operations
(AUTO STOP IDLE)
B Panning speed settings for different zoom
rations (PROPORTIONAL PAN)
C
Lens starting point position setting
(SET NORTH)
A Preset position settings
(PRESET POSITION)
B Sequential mode settings (SEQUENCE)
C Tour mode settings (TOUR)
D Automatic pan settings (AUTO PAN)
E Zone settings (SET ZONE)
F Automatic restore standby time settings
(FUNCTION IDLE)
G Automatic restore function settings
(FUNCTION)
Masking number setting
Masking display setting