AEG WALLBOX WB 22 PRO Mode D'emploi page 14

14 www.aeg-automitive.com
2.4 Warranty and disclaimer
LRT Automotive GmbH only accepts responsibility for the delivery condition of the charging station and for all work carried out by LRT specialist
personnel and official partner companies.
The manufacturer's warranty shall elapse in the event of:
• Failure to observe the safety and operating instructions.
• Improper handling and non-intended use of the charging station.
• Unauthorised and improper installation, maintenance and repair of the charging station.
• Modifications or changes to the charging station.
• Damage caused by fire, flooding and other natural disasters.
• Transport damage or damage caused during installation.
3. DESCRIPTION
3.1 Layout
1 Charging housing
Cover fitting
2
Bracket for charging cable
3
Fig. 1: Charging station housing outside
3.2 Function
The AEG Wallbox Pro is a three-phase charging station for charging electric vehicles according to charging mode 3 as per IEC 61851 with alternat-
ing current (AC).
Functional element
Type 2 cable
LED display
RCCB type A + DC fault current detection
6
5
1
2
4 Charging cable with coupler
5 Power cable connection
6 LED display
Function
Coupler for connecting the vehicle
Charging station status display
Safety
3
4