Hamilton Beach 840088000 Instructions page 4

840088000 Ev02.qxd 7/5/01 9:53 AM Page 6
Using Your Food Processor
How to Lock the Bowl
Align base and bowl as illustrated.
Turn bowl clockwise until it locks into
place.
NOTE: The food processor will not
work unless the bowl is locked.
How to Lock the Cover
Align cover as illustrated. Place
cover on bowl and turn clockwise
until it locks into place.
NOTE: The food processor will not
work unless the cover is locked.
How to Operate the Controls
The controls are conveniently
located on top of the base. Rotate
the knob to select a speed: 1 (Low)
or 2 (High). The processor will run
continuously. For instant on and off
control, use the PULSE button.
Off
On
Pulse
6
Processing Using Slicer/Shredder
• To slice or shred cheese, select firm cheese like Cheddar,
Monterey Jack, or Swiss. Place cheese in freezer for
30 minutes before processing.
• The Reversible Slicer/Shredder Disc has a slicing blade on
one side and shredding teeth on the other. Place on motor
shaft with desired cutting edge facing up.
• To julienne vegetables, slice then remove from bowl and
restack the vegetables. Pack into food chute with slices
vertical. Slice again to make match-stick cut vegetables.
1. Make sure the Control Switch is
turned to OFF and the unit is
unplugged.
2. Lock the bowl onto base.
(See page 6.)
3. Put Slicer/Shredder Disc on
motor shaft with the desired
side facing up for either slicing
or shredding. Lock cover onto
bowl. (See page 6.)
4. Cut food to fit food chute. Pack food chute tightly with
food. Insert food pusher in chute. Always use the food
pusher to feed food into the chute. NEVER PUSH
FOOD THROUGH CHUTE WITH HANDS.
5. Plug in unit and process food.
6. Select speed. While pressing on food pusher, select 1 or
2 for high or low speed or PULSE to process food.
7. When food chute is empty, select OFF or release from
PULSE position. Wait until blade has stopped rotating
before removing cover.
Slicer/Shredder Disc
Motor
Shaft
7