Motorola CLP Serie Guide De L'utilisateur page 31

3 Plug the cord into an AC outlet and then into the charger.
4 Turn off the radio.
NOTE: When charging a battery attached to radio, ensure that the radio is turned off.
You can enable or disable the radio to automatically turn off when radio is inserted into
the charger feature through Customer Programming Software (CPS).
5 Insert the radio facing down with battery installed into the charging pocket, ensuring that the
radio contacts are aligned with the MUC contacts.
NOTE: The battery can be charged by using the slot on the flat surface of the charging
pocket.
Figure 9: Charging Radios
3.9
Charger LED Indications
On the drop-in charger, the radio charging pocket has an LED Charger.
On the Multi-Unit Charger (MUC), each of the six charging pockets has an LED.
NOTE: You can clone up to two source radios and two target radios using MUC. For more
information on cloning, see
For part number details, see
Table 5: Charger LED Indicator
Status
Battery is charging
Battery is fully charged
3
Battery Fault
3
Re-seating the battery pack corrects this issue.
Radio Cloning on page 36
Accessories on page 53.
LED Indication
Steady Red
Steady Green
Blinking Red
MN006179A01-AD
Chapter 3 : Battery and Charger
31