Motorola CLP Serie Guide De L'utilisateur page 23

CLP1010e & CLP1013e Single-Channel Mod-
els
Channel LED Status
2.8.2
LED Indicators
Feature
Monitor mode
Call tone
Scan
Turn on or off
Advanced radio configuration
2.8.2.1
Volume LED
When volume is increased, Smart Status Glow Ring LED lights up in a clockwise direction from the
bottom left to the bottom right of the LED ring.
The followings are the three levels of LED brightness for each LED when volume is increased:
• Dim
• Medium
• Maximum brightness
2.9
Monitoring Channels
This feature allows you to ensure that a channel is free before transmitting. When enabled, the radio
overrides all programmed code settings and allows the receiver to listen in on any frequency. On a
clear frequency, you can hear a hiss. If a frequency is in use, you can hear the broadcast.
CLP1080e & CLP1083e Multi-Channel Mod-
els
Color Channel
6
7
8
LED Indicator
Solid per channel color.
Momentary solid per channel color.
LED slowly displays all current channel colour one after
another.
Solid red for 2 seconds
Blinking green.
MN006179A01-AD
Chapter 2 : Getting Started
LED Status Color
White
Aqua
Orange
23