Publicité
Product Reset
To factory reset the WAND Module
1. Press and hold the button on the WAND
Module for 5 seconds. "Fdr" (factory
default reset) will appear on
the controller LCD.
2. The module LED will turn off.
3. Release the button when the solid
amber
LED appears and "done"
displays on the controller LCD.
4. Return to the online setup wizard in your
Hydrawise Controller settings account
page to reconnect the WAND Module
to Wi-Fi.
Quick troubleshooting tips
• Be in range of Wi-Fi signal and verify
with your smartphone.
• Verify correct Wi-Fi network name and
password used.
• Verify Wi-Fi network is using 2.4 GHz
and not 5 GHz.
SCAN
for help
https:/ /hunter.help/wifispecs
18
Solid LED color:
The WAND Module is waiting for the
user to add Wi-Fi credentials.
Controller is online and connected to
the Hydrawise server.
Incorrect Wi-Fi password entered or
Wi-Fi network lost.
Flashing LED color:
2 blinks, WAND is in "SAP" (Wi-Fi
Direct) mode.
3 blinks, WAND is in "Pbc" router-
supported (WPS push-button) mode.
Refer to the online setup wizard for Wi-Fi
instructions found in your Hydrawise
controller settings account page.
Firmware Update Codes
1. UPd8A - When online, the WAND LED
will turn red
on the controller upgrading to the latest
X2 Controller firmware.
2. UPd8b - When online, the WAND LED
will turn amber
appear on the controller upgrading to
the latest Hydrawise firmware.
3. UPd8C - When online, the WAND LED
will stay green
appear on the controller upgrading to
the latest Wi-Fi firmware.
and "UPd8A" will appear
and "UPd8b" will
and "UPd8C" will
hydrawise.com
Publicité
