Grohe 36 407 Notice D'utilisation page 95

Receive mode
Battery-operated fittings must be switched to receive mode
before data transfer:
- Start water flow for wash basin fittings.
- For urinal fittings, allow an object to be detected for at
least 5 s by the sensor system.
The fitting is ready to receive input for 10 s.
Fittings are ready to receive input for 3 min after the
voltage supply is connected.
Mains-operated fittings are ready to receive input at any
time.
Align remote control
Point remote control at the sensor system at a distance of
5–16 cm.
Do not hold remote control within range of the water jet.
Content
94