Grohe 36 407 Notice D'utilisation page 121

Automatic flushing mode
After the interval in the setting, the fitting flushes after the
last use of the fitting (usage-dependent).
Fitting flushes after the interval in the setting (usage-
independent).
Switching between the two states.
Factory setting: Usage-dependent
Cleaning mode

If cleaning mode is activated, water flow can be locked

temporarily. The locking of the water flow works through
proximity sensing on the sensor system.
d/s d  d/s d
Z
Activate/deactivate cleaning mode
Activate cleaning mode.
>
Deactivate cleaning mode.
d/s d  d/s d
Switching between the two states.
^ E
Factory setting: Activated
Content
120