Télécharger Imprimer la page

Hayward AquaVac 6 Serie Mode D'emploi page 19

Masquer les pouces Voir aussi pour AquaVac 6 Serie:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
>3.5m
STARTING THE CLEANER
Start the cleaning cycle or program by
pressing the Start/Stop button.
The blinking green light will change
to solid green confirming that the
selected mode and schedule are now
enabled, and the cleaner can now start
its program.
Schedule Mode - Press to choose
a cleaning schedule.
Single Cleaning Cycle - Launch a
single cleaning cycle.
Weekly Calendar Cycle - Launch
the programmed daily cleaning
schedule on your AquaVac
connect app.
Available on Wi-Fi models only.
Recurring Cycle - Launch a
48
cleaning cycle every 48 hours
h
(At the time it's been activated)
or at the specific time set on
your AquaVac connect app
(Wi-Fi models
only).
It is ideal to have the control unit positioned near the
midpoint of your pool (lengthwise).
Depending on the size and shape of your pool, the entire
length of the floating cable may not be necessary. The
floating cable should reach from the cleaner control unit to
the furthest point in the pool, plus the depth at the deep
end of the pool. To reduce cable tangling, any excess cable
should be coiled and placed next to the control unit.
Submerge the cleaner in the pool by gently rocking it back,
forth and sideways to help the cleaner purge trapped air and
sink to the pool bottom.
48
h
48
h
48
h
CLEANER LOCATION
Wi-Fi LED -
Available on Wi-Fi models only.
Canister Cleaning Reminder -
Inspect the cleaner's canister and
empty, if needed. This reminder
does not necessarily indicate the
canister is full.
Cleaning Mode - Press to choose a
cleaning mode.
Full Cycle - The cleaner will clean
the pool floor thoroughly, walls and
waterline minimally. (~150 mins.)
Waterline Mode - The cleaner will
clean the waterline thoroughly and
may additionally clean the bottom
to relocate. (~90 mins.)
Available on Wi-Fi models only.
Floor Mode - The cleaner will
clean only the floor of the pool.
This mode is often used on pools
equipped with automatic covers,
and is enabled to avoid the
cleaner from climbing the wall and
touching the pool cover.
(~90 mins.)

Publicité

loading

Ce manuel est également adapté pour:

Rc361248