RK Rose+Krieger EP Serie Notice D'assemblage page 28

2. Notes
2.1 Notes to these installation instructions
These installation instructions are only applicable to the linear units described and are intended as
documentation for the manufacturer of the end product in which this incomplete machine is in-
corporated.
We wish to point out explicitly that the manufacturer of the end product must produce an ope-
rating instruction for the end user which includes all the functions and notes on the dangers of
the end product.
This applies equally to integration in a machine. In this case, the manufacturer of the machine is
responsible for the relevant safety devices, checks, monitoring potential crushing and shearing
points and the documentation.
These installation instructions will also help you,
•
to avoid hazards,
•
to prevent down time,
•
and to guarantee and increase the working life of this product.
Notes on hazards, safety regulations and the information in these installation instructions are to
be obeyed to the letter.
These installation instructions are to be read and obeyed by everyone who works with the pro-
duct.
Commissioning is forbidden until the machine complies with the provisions of EC Directive 2006/
42/EC (Machines Directive). Before bringing into service, this must comply with EC directives, in-
cluding documentation.
We hereby advise any re-user of this incomplete machine/part-machine/machine parts explicitly
of its obligation to expand and complete this documentation. In particular, when building in or
attaching electrical components and/or drives, the re-user is to complete a CE compliance decla-
ration.
Our installation declaration becomes invalid automatically.
28