Suzuki Sissy bar Instructions De Montage page 3

Description : Sissy bar
Applications : UH 125 – 200 K7 -
Contents: Ref.
1
2
3
4
5
6
7
Tool Ref. Tools Description
Required A Allen key of 6 mm
Drill of 6 mm
B
Conical drill bit
C
Drill machine
D
Important
Please read this manual and follow its instructions carefully. To emphasize Special
information, the symbol and words
special meanings. These Special meanings apply except when laws or regulations
require that the signal words be used with a different meaning. Pay special attention
to the messages highlighted by these signal words.
NOTE: Indicates special information to make maintenance easier or
NOTE: Certain technical experience is required for the mounting. If you are not sure
how to carry out the work you should leave it to be done by your SUZUKI dealership.
_______________________________________________
Description
Sissy bar
Spacer 8.2 x 20 x h10
Spacer 8.2 x 20 x h 7
Spacer 8.2 x 20 x h 19
Bolts TCE 8 X 30
Washer M8
Template
Indicates potential hazard that could result in death or injury.
Indicates potential hazard that could result in vehicle damage.
instructions clearer.
INSTALLATION
Part Number: 990D0-03H00-050 black
990D0-03H05-050 chrome.
Installation Time : 25 minutes
WARNING / CAUTION / NOTE
WARNING, CAUTION and NOTE have
WARNING
CAUTION
SUZUKI GENUINE ACCESSORIES
INSTRUCTIONS
Qty.
1
2
2
1
1
1
1