Contents Of Shipping Container; Transport And Start Up; Transport And Installation - Jet Tools JWBS-10 Mode D'emploi

Refer to Figures 3 and 4.
1 Band saw – A
1 Table insert – B
1 Table – C
1 Fence – D
1 Guide rail – E
1 Handle – F
2 Hex wrenches, 3mm,6mm – G
1 Wrench – H
1 Miter gauge – J
4 Stand legs – K
4 Rubber foot – L
2 Short support plate – M
2 Long cross brace – N
2 Long support plate – O
2 Short cross brace – P
1 Push Stick---R
1 Owner's Manual (not shown)
1 Part List (not shown)
1 Hardware package
Fig. 2

4.6 Contents of shipping container

Hardware package (JWBS10-HP), includes:
3 Hex cap screw, M8x55 – HP1
4 Hex washer head screw, M6x12 – HP2
32 Carriage bolt, M6x12 – HP3
4 Wing screw – HP4
4 Flat washer blk oxide M8 – HP5
6 Flat washer M8 – HP6
3 Lock washer M8 – HP7
3 Hex nut, M8 – HP8
32 Hex flange nut, M6 – HP9
Fig. 4

5. Transport and start up

5.1 Transport and installation

For transport use a forklift or hand trolley. Make sure the
machine does not tip or fall off during transport.
The machine is designed to operate in closed rooms and
Fig.3
must be placed stable on firm and levelled ground.
6