Télécharger Imprimer la page

ProBreeze PB-01 Mode D'emploi page 3

Masquer les pouces Voir aussi pour PB-01:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 11
Avoid placing the power cord in areas where it can become a tripping hazard. Do not
-
place the power cord under carpeting or cover it with rugs, runners or similar.
To avoid a circuit overload when using this appliance, do not operate another
-
high-wattage appliance on the same electrical circuit.
Always plug the fan directly into a wall socket. Avoid using extension leads where
-
possible as they may overheat and cause a risk of fire.
Do not use this appliance with an external programmer, timer switch or any other devise
-
which would switch the device on automatically unless this has already been pre-built
into the appliance by the manufacturer.
Do not kink or wrap the power cord and plug around the appliance, as this may cause
-
the insulation to weaken or split, particularly where it enters the appliance.
Do not pull on the mains cable. Never move, carry or hang the appliance by the mains
-
cable.
Do not operate the appliance with any safety guards removed.
-
Do not operate the appliance if there are signs of damage to the appliance, power cord,
-
or any of the accessories.
Do not operate the appliance with the fan safety guards removed.
-
If the supply cord is damaged, it must be replaced by the manufacturer, its service
-
agent or a similarly qualified person in order to avoid a hazard.
Do not attempt to repair or adjust any electrical or mechanical elements in the
-
appliance. Doing so may be unsafe and will void your warranty.
Ensure that the mains supply (including voltage, frequency and power) complies with
-
the rating label of the appliance.
Do not use the appliance near petrol, paints, flammable gases, ovens, or other heating
-
sources.
Note: The included clip is designed to attach to flat objects between 1cm and 4.5cm in
depth. The fan is not designed for use on larger surfaces or cylindrical and tubular objects.
FEATURES
1.
Fan head
2.
Carry handle
Motor housing
3.
4.
Speed control switch
5.
Securing nut
6.
Tilt adjustment screw
7.
Pillar
8.
360° Rotary joint
9.
Clip
10.
Rubber grips
1.
2.
3.
4.
5.
7.
8.
9.
6.
10.
English | 2

Publicité

loading