Canon imageRUNNER 2204 Mise En Route page 10

Handling
WARNING
• Immediately unplug the power plug from the AC power outlet and
contact an authorized Canon dealer if the machine makes an unusual
noise, emits an unusual smell, or emits smoke or excessive heat.
Continued use may result in a fire or electrical shock.
• Do not disassemble or modify this machine. There are high-voltage
and high-temperature components inside the machine which may
result in a fire or electrical shock.
• Place the machine where children will not come in contact with the
power cord and other cables or internal and electrical parts. Failure to
do so may result in unexpected accidents.
• Do not use flammable sprays near this machine. If flammable
substances come into contact with electrical parts inside this
machine, it may result in a fire or electrical shock.
• When plugging or unplugging a USB cable when the power plug is
plugged into an AC power outlet, do not touch the metal part of the
connector, as this may result in an electrical shock.
• If you are using a cardiac pacemaker:
This machine generates a low level magnetic flux. If you use a cardiac
pacemaker and feel abnormalities, please move away from this
machine and consult your physician immediately.
CAUTION
• For your safety, please unplug the power cord if the machine will not
be used for a long period of time.
• Use caution when opening and closing covers to avoid injury to your
hands.
• Close the feeder gently to avoid catching your hands in the back of
the feeder, as this may result in personal injury.
• Keep hands and clothing away from the rollers in the output area. If
the rollers catch your hands or clothing, this may result in personal
injury.
• The inside of the machine and the output slot is very hot during and
immediately after use. Avoid contact with these areas to prevent
burns. Also, printed paper may be hot immediately after being
output, so use caution when handling it. Failure to do so may result in
burns.
• The laser beam can be harmful to human bodies. Since radiation
emitted inside the product is completely confined within protective
housings and external covers, the laser beam cannot escape from the
machine during any phase of user operation. Read the following
remarks and instructions for safety.
ū Never open covers other than those instructed in the manuals for
this machine.
• If you operate the machine in manners other than the control,
adjustment, and operating procedures prescribed in this manual, this
may result in hazardous radiation exposure.
• If the laser beam should escape and enter your eyes, exposure may
cause damage to your eyes.
En
IMPORTANT
• If the operating noise concerns you:
Depending on the use environment and operating mode, if the
operating noise is of concern, it is recommended that the machine be
Installed in a place other than the office.
10
Maintenance and Inspections
WARNING
• Before cleaning, turn OFF the power and unplug the power plug from
the AC power outlet. Failure to do so may result in a fire or electrical
shock.
• Unplug the power plug periodically and clean with a dry cloth to
remove dust and grime. Accumulated dust may absorb humidity in
the air and may result in a fire if it comes into contact with electricity.
• Use a damp, well wrung-out cloth to clean the machine. Dampen
cleaning cloths with water only. Do not use alcohol, benzenes, paint
thinners, or other flammable substances. Do not use tissue paper or
paper towels. If these substances come into contact with electrical
parts inside the machine, they may generate static electricity or result
in a fire or electrical shock.
• Check the power cord and plug periodically for damage. Check the
machine for rust, dents, scratches, cracks, or excessive heat
generation. Use of poorly-maintained equipment may result in a fire
or electrical shock.
Consumables
WARNING
• Do not dispose of used toner cartridges and drum units in open
flames. Also, do not store toner cartridges, drum units, or paper in a
location exposed to open flames. This may cause the toner to ignite,
and result in burns or fire.
• If you accidentally spill or scatter toner, carefully wipe up the loose
toner with a damp, soft cloth and avoid inhaling any toner dust. Do
not use a vacuum cleaner that is not equipped with safety measures
to prevent dust explosions to clean up loose toner. Doing so may
cause damage to the vacuum cleaner or result in a dust explosion
due to static discharge.
CAUTION
• Use caution not to inhale any toner. If you should inhale toner,
consult a physician immediately.
• Use caution so that toner does not get into your eyes or mouth. If
toner should get into your eyes or mouth, immediately wash with
cold water and consult a physician.
• Use caution so that toner does not come into contact with your skin.
If it should, wash with soap and cold water. If there is any irritation on
your skin, consult a physician immediately.
• Keep the toner cartridges and other consumables out of the reach of
small children. If toner is ingested, consult a physician or poison
control center immediately.
• Do not disassemble or modify the toner cartridges. Doing so may
cause the toner to scatter.
• Remove the sealing tape of the toner cartridge completely without
using excessive force. Doing otherwise may cause the toner to scatter.
Legal Notices
Product Name
Safety regulations require the product's name to be registered. In some
regions where this product is sold, the following name(s) in parenthesis
may be registered instead.
imageRUNNER 2204 (F193290)
EMC requirements of EC Directive
This equipment conforms with the essential EMC requirements of EC
Directive. We declare that this product conforms with the EMC
requirements of EC Directive at nominal mains input 230 V, 50 Hz
although the rated input of the product is 220 to 240 V, 50/60 Hz. Use of
shielded cable is necessary to comply with the technical EMC
requirements of EC Directive.