Related Documents; Product Description; Intended Use; Prerequisites - Bosch SCT 410 Notice Originale

en 12 | SCT 410 | Product description
CAUTION – Risk of injury due to parts
falling off the precision measuring bar of
the SCT 410.
¶
During work with the SCT 410, use
arrestor cables to secure the targets and
the P-Assist laser unit on the precision
measuring bar.
¶
For assembly, disassembly and transport
of the precision measuring bar, remove
the targets and the laser unit.
WARNING – Severe eye damage from
laser beam.
¶
Never look directly into the laser source.
¶
Never point the laser beam at people,
particularly at their face and eyes.
¶
To test function, hold an object in front
of the laser exit point.
2.4

Related documents

R
SCT 141x original operating instructions – 1 690
386 063
R
P-Assist S5 original operating instructions –
1 690 386 038
R
Multi-Target-Shop short instructions
R
Passenger car manufacturer information
3.

Product description

3.1

Intended use

SCT 410 is a mobile post for the precision measuring
bar of the SCT 141x. Only the precision measuring bar
of the SCT 141x may be attached to the SCT 410.
The SCT 410 has an option for an enhanced measure-
ment bay for static windshield camera calibration on
passenger cars.
|
1 690 386 066 2017-08-11
3.2

Prerequisites

R
SCT 1415 S2 upgrade option
R
Level measuring location:
$
The inclination of the entire test system may not
exceed ±1.5 %.
$
The flatness of the measuring location of the
SCT 410 may not exceed 1 mm.
$
The flatness of the surface on which the vehicle
is placed is 10 mm.
R
Vehicle-specific calibration boards
R
Multi-Target-Shop short instructions
R
No direct sunlight or background lighting behind the

SCT 410

R
Passenger car manufacturer information
3.3

Scope of delivery

Designation
Base plate with assembly material
Post with slide
Angle mounting bracket
Clamp
Mount for large calibration boards
Setting aid*
Original operating instructions
Tab. 1: Scope of delivery
* Optional accessory
3.4 SCT 410
5
1
4
2
6
3
Fig. 1: Second post for precision measuring bar
1 Post
2 Angle mounting bracket
3 Wheeled base plate
4 Clamp
5 Mount for large calibration boards (optional accessory)
6 Setting aid (optional accessory)
Part number
1 690 381 155
1 690 381 125
1 690 381 229
1 690 381 233
1 690 381 157
1 690 381 210
1 690 386 066
Robert Bosch GmbH