Publicité
2
3
Lift the stove up onto the wall bracket and push it into place against
the wall until it 'clicks' into place (3).
Check that the top plate of the stove is horizontally level. If it is not,
it may necessary to lift the stove down from the wall and adjust the
bracket.
M4 thread for pointed screws
Mount the bottommost wall bracket (4) under the stove using
two M6 screws.
3
Use the centremost M6 screw (6) to adjust the stove so it is plumb.
Attach the bracket to the wall, if preferred, but do not tighten the
screws due the stove's downward movement during heating.
4
6
5
4
Finally, screw two M4 pointed screws (6) into each side of the wall
bracket which locks the stove in relation to the bracket.
See the photo at the top of the page.
6
5
Publicité
