Publicité
AIR CONNECTION THROUGH THE FLOOR
Q-TEE C 57
1. R emove the reflector plate (1) by removing the 4 screws (2).
2. T ap out the knockout blank in the reflector plate using a
hammer.
3. R emove the two screws in the damper and one in the
bottom of the combustion chamber (3).
4. R eplace the three screws with spacers (4) and use these
screws (3) to mount the air box on these spacers.
5. R eattach the reflector plate (1).
4
4
3
3
EXTERNAL AIR CONNECTION, AIRSYSTEM
3
3
1
2
Publicité
