Nemaxx P6 Mode D'emploi page 26

During the operation, the stove is interrupted by
power cut.
It means you need to clean the stove.
If everything is fine, you can press
ATTENTION!!!
If showing following words when you start the stove:
It means temperature sensor 1(exhaust gas
temperature sensor) - short-circuit.
It means temperature sensor 1 is open-circuit.
It means temperature sensor 2
(safety temperature sensor below the hopper)
- short-circuit.
It means temperature sensor 2 is open-circuit.
It means temperature sensor 3 (sensor for testing
the room temperature, which is located on the rear
panel)
- short-circuit.
It means temperature sensor 3 is open-circuit.
EN
to delete the Error code.
26