Nemaxx P6 Mode D'emploi page 15

ON/OFF
1. Turning the heater on and off is performed with the ON/OFF button
After switching on, the message, „CLEANING"
will be shown in order to clean the fire pot.
2. After first phase „Cleaning", the word „Lighting"
will be shown on the display.
During this phase the pellets will be loading in
the burn pot.
This state remains up to when the smokes
temperature doesn't exceed the planned
threshold.
3. When the Lighting phase is finished, some
minutes will be necessary for the flame
stabilization.
This phase is shown by the word
„STABILIZATION" which will stay indicated on
the display and will indicate the maintenance
phase of the achieved operational status.
4. For turning off, push
The display will show:
5. After the temperature in the stove is cold
enough, the word ‚GOODBYE' is displayed.
EN
.
15
Version: 10
25.10.2021
.