5.3. Mounting on DIN studs
The LX SCOUT can be attached to all common stands thanks to its mount for a
DIN 14640 stud� (Figure G)�
5.4. Using the rubber band
If the LX SCOUT is hung on a narrow object, for example, the rung of a ladder or a
pipe, it can also be attached with the rubber band to prevent it from falling�
On its own, the rubber band cannot support the weight of the LX SCOUT; it simply
provides additional security� (Figure H)�
5.5. Hammering the spike into a vertical surface
The spike is designed to be hammered into dry walls; it is not suitable for any other
type of material� Make sure that you do not damage any live wires� Turn the spike
to the fully extended and locked position� Hammer the spike into the dry wall�
(Figure J)� Press the release button on the spike to fold it in�
6. MAINTENANCE AND CARE
Carry out a visual inspection regularly after each use or at least once a year�
The spotlight is maintenance free and does not contain any parts that require
replacing or maintenance�
6.1. Visual inspection
•
No deformations on the frame
•
All moving parts move freely
•
All parts of the spotlight are present
•
The lens is not scratched or cracked
•
The battery contacts are not corroded and the battery is easy to plug in
•
The units are not soiled, the cooling fins are clean
6.2. Care instructions
If the device becomes soiled, clean it carefully with a soft, dry cloth to avoid dam-
aging it� Do not use any cleaning agents or solvents� If you still have any questions
about care or maintenance, please contact your authorized dealer or LUKAS
Customer Service directly�
The address for the LUKAS Customer Service department is:
LUKAS
Weinstrasse 39, 91058 Erlangen,
Germany
Tel�:
(+49) 09131 / 698 - 348
Fax�: (+49) 09131 / 698 - 353
http://www�lukas�com
Hydraulik GmbH
de
en
fr
es
pt
it
nl
da
sv
fi
el
pl
cs
sk
hu
ro
bg
sl
hr
et
lv
lt
zh
ko
ja
ar
17