Lukas LX SCOUT Manuel D'utilisation page 16

3. LX SCOUT COMPONENTS
de
en
fr
es
pt
it
4. OPERATION
nl
da
4.1. Replacing the battery
Push the battery from above into the battery slot until it locks in place (figure A)�
sv
4.2. Removing the battery
fi
Release the lock and remove the battery (figure B)�
el
4.3. Querying the battery status
pl
Press the query button on the battery (figure C)� Note also the separate instruction
manual for the battery�
cs
4.4. Flashlight function of the battery
sk
To switch on the flashlight function, press the query button on the battery twice in
hu
quick succession (figure C)� To switch it off, press the query button again� The pur-
pose of the flashlight function is to help you locate the battery compartment�
ro
4.5. Switching on and adjusting the light intensity
bg
To switch the LX SCOUT on, press the switch (figure D)� The light intensity of the
LX SCOUT can be adjusted� The LX SCOUT switches on with full light intensity�
sl
Medium, Low and Spotlight modes are switched on by tapping the switch forward�
hr
5. SETTING UP THE LX SCOUT
et
The LX SCOUT can be set up differently according to the situation�
lv
5.1. Setting up the LX SCOUT on an even surface
lt
Place the LX SCOUT on an even surface� You can adjust the angle of the cone of
light in any position� (Figure E)�
zh
5.2. Hanging the LX SCOUT on an object
ko
Hang the LX SCOUT on a vertical object (e�g� a door) by hooking the feet exten-
sions over the object� You can adjust the beam angle� (Figure F)�
ja
ar
16
Page 2
1 Main switch
2 Lens
3 Mount for DIN studs
4 Spike for wall mounting
5 Elastic band for additional security