b) Do not use the power tool if the switch does not turn it on and
off. Any power tool that cannot be controlled with the switch is dangerous
and must be repaired.
c) Disconnect the plug from the power source and/or the battery
pack from the power tool before making any adjustments,
changing accessories, or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not
allow persons unfamiliar with the power tool or these instructions
to operate the power tool. Power tools are dangerous in the hands of
untrained users.
e) Maintain power tools. Check for misalignment or binding of
moving parts, breakage of parts and any other condition that may
affect the power tools operation. If damaged, have the power tool
repaired before use. Many accidents are caused by poorly maintained
power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools
with sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance
with these instructions, taking into account the working conditions
and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
1.1.5. Service
a) Have your power tool serviced by a qualified repair person using
only identical replacement parts. This will ensure that the safety of the
power tool is maintained.
1.2. Safety information for tool
a) This electric tool is designed for use as a tool. Obey all the safety
instructions, general instructions, illustrations and data supplied with the
tool.
b) This electric tool is not suitable for grinding, cutting-off or working with
wire brushes.
c) Do not use any accessories which have not been designed and
recommended by the manufacturer.
d) Wear personal protection equipment and always wear safety goggles.
e) Ensure that others keep a safe distance away from where you are working.
8