Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1.4. Description of symbols
Pay attention to all the signs and symbols shown in these instructions and on
your tool.
Make a note of these signs and symbols.
Important.
Read the instructions for use
before starting the machine.
Wear safety goggles.
Wear ear protection.
Wear good quality, protective
strong gloves.
2. SCOPE OF USE
The machine is designed for polishing coated surfaces.
3. STARTING UP
3.1. Assembly (Fig. A-D)
Important! Pull out the mains power plug before starting the
assembly work.
3.1.1. Install the auxiliary handle with the Allen key. (Fig. A-C)
3.1.2. Press the spindle lock (1) to lock the gear and assemble the polishing /
sanding disk(7) on the machine. (Fig. D)
3.2. Switch on/off (E)
To switch on intermittent operation mode:
10
Always use breathing
apparatus when working with
materials which generate
dust.
End of life machines contain
valuable materials and
therefore they should not
be placed in household
waste. We would ask you to
play your part in protecting
resources and help protect the
environment by returning this
machine to a recycling point
(if one is available) when it
reaches the end of its life.
Publicité
Table des Matières
