Technical Data; Cleaning And Maintenance - Michelin MCP 1100 Notice D'utilisation

3.5. Care tips
3.5.1. For optimum paintwork protection, you should polish your car 2 to 3
times a year.
3.5.2. Wash your car at least every 2 weeks. Avoid using household detergents
as these can damage the paintwork and remove the layer of wax.
3.5.3. Wash your car with a clean sponge, working from top to bottom.
3.5.4. Remove all insects, bird droppings and tar stains from the paintwork
daily.
3.5.5. If you use any window-cleaning agents, spray them onto a cloth and
not directly onto the windows in order to prevent them wetting the
paintwork.

4. TECHNICAL DATA

Voltage:
Power rating:
Speed:
Polishing / sanding disk diameter:
Connection thread:
L sound power level:
WA
L sound pressure level:
PA
Vibration a :
ah,P
Totally insulated:

5. CLEANING AND MAINTENANCE

Always pull out the mains power plug before starting any cleaning work.
5.1. Cleaning
5.1.1. Keep all safety devices, air vents and the motor housing free of dirt and
dust as far as possible. Wipe the equipment with a clean cloth or blow
it with compressed air at low pressure.
5.1.2. We recommend that you clean the device immediately each time you
have finished using it.
5.1.3. Clean the equipment regularly with a moist cloth and some soft soap.
Do not use cleaning agents or solvents. These could attack the plastic
parts of the equipment. Ensure that no water can seep into the device.
12
220-240 V~ 50/60 Hz
1100 W
600-3000 rpm
Ø 180 mm
M14
71 dB(A)
82 dB(A)
2
3.36 m/s
II/