Override Current Settings (Hold); Temporary; Vacation - Robertshaw C9701i2 Notice D'utilisation

OVERRIDE CURRENT SETTINGS
NOTES: These directions are for both Heating and Cooling.
Hold does not appear in the Main Menu if Off is the selected mode.
To access the Override Settings, select Menu on the main screen.
Hold – With this menu item you may override the current temperature setpoint and choose a new setpoint
Main Menu
Hold
to be held during the override period. This can be a few hours, or it can be a longer period.
Fan
Schedule
To start a Hold: On the Main Menu, scroll to Hold, and press Select. OR. . . While at the main screen,
Time & Day
press either the
Back Select
Hold Temperature
Cool: 80
50 60 70 80
Next
Cancel
Select Override Type

Temporary

Vacation

Back
page 1 of 2
or button. In either case, the Hold Temperature screen appears.
Set the Hold Temperature by pressing the
displayed. Select Next. The Select Override Type screen appears.
90
NOTE: The unlabeled arrow is the current room temperature. The arrow with a
programmed setpoint for that mode.
A Temporary override lasts up to 24 hours.
A Vacation override lasts up to one year.
Next
Hold Temperature
68
Until
12:20
PM
TODAY
Back Accept
Returning Home
68
In
2
Days
ON WEDNESDAY, 6/22/05
Back Accept
or
Temporary Hold – Select the time when the hold will end.
Set At 77 Until 12:20PM
Select Accept. The Main Menu will appear. Select Back.
°F
.9
The main screen will show the hold temperature and time.
9:15 AM
Outside 92 When the hold expires, normal operation continues.
Resume Menu
Vacation Hold – Select the number of days for the hold to
last. Select Accept. The Main Menu will appear. Select
Set At 77 Until Jun 22
°F
Back. The main screen will show the hold temperature and
.9
9:15 AM
time. Vacation hold ends at midnight on the last day.
Outside 42
NOTE: To cancel the hold at any time, select Resume.
Resume Menu
button until the desired temperature is
or is the
9