Collomix Xo 1 R Mode D'emploi D'origine page 7

The greater the viscosity of the material, the greater
the impact of the torque forces on the machine, so you
should be prepared for this when you carry out your
work.
If the mixing tool comes into contact with a surface (e.g.
the bo琀琀om of the tub) while running, it may kick back.
Set the machine down res琀椀ng on the guard handle a昀琀er
you have 昀椀nished your mixing work.
For transporta琀椀on purposes the HEXFIX mixing tool can
be inserted through the hexagon punch-hole provided in
the handle frame.
Care and maintenance
L
WARNING
► Before you carry out any operations on the machi-
ne, and especially when changing the mixing tool,
always pull out the power plug out first!
Clean the machine and the mixing tool immediately a昀琀er
use. We recommend that you use the Collomix MIXER
CLEAN cleaning bucket for cleaning.
Keep the HEXAFIX coupling clean and freely moving at all
琀椀mes.
Take the mixing tool out of the
coupling a昀琀er you have 昀椀nished
Fett
Grease
your work.
Graisse Grease the hexagon mount of the
coupling at regular intervals with
Smar
suitable grease.
Keep the ven琀椀la琀椀on slits clean
and clear at all 琀椀mes so that the machine can be
properly cooled. Blocked ven琀椀la琀椀on slits will lead to
irreparable damage to the machine.
Make sure that the ON/OFF switch moves and releases
smoothly at all 琀椀mes.
The machine is equipped with self-deac琀椀va琀椀ng carbon
brushes. This means that the machine will shut itself
down once a certain level of wear is reached. The carbon
brushes can be replaced by the authorized customer
service center or by the Collomix Service center.
Have repairs carried out only by an approved workshop
or by your Collomix Service.
Only use original Collomix accessories and replacement
parts.
For exploded drawings, lists of replacement parts
and the form for repair orders, please refer to:
h琀琀p://www.collomix.com
Disposal
The device, accessories and packaging should all be
consigned for environment-friendly recycling.
Electrical tools which have come to the end of their
service lives must be made unusable by removing the
mains power cable.
Do not dispose of electrical tools with household waste.
Content
1x Mixing machine
1x Mixing paddle
1x Hexa昀椀x adapter
1x Manual
1x General safety notes
Warranty
The manufacturer provides a warranty within the
framework of his terms and condi琀椀ons of delivery in
accordance with the requirements of statutory/country-
speci昀椀c provisions. Should you need to make a claim
under the warranty, please provide us with your invoice
or delivery note.
On no account will any warranty claims be accepted if
any repairs are carried out by third par琀椀es. In the event
of any irregulari琀椀es, please send the machine to us.
Complaints can only be accepted if the device is sent to
the Collomix Service center undismantled.
The warranty does not apply to damages caused
by normal wear, overloading, improper handling,
unsuitable accessories or inadequate maintenance.
Any structural or func琀椀onal modi昀椀ca琀椀ons to the
machine which are made without our agreement shall
render the warranty and the Declara琀椀on of Conformity
null and void.
Subject to change.
Serviceadress USA and Canada:
Collomix North America Inc.
648 Crescent Court
Milwaukee, WI 53213
Phone: 414 471 3883
Fax: 414 918 8032
E-Mail: al.karraker@collomix.com
www.collomix.us
Manufacturer:
Collomix GmbH
Daimlerstrasse 9
85080 Gaimersheim
Germany
EN