Operation; Emptying (Disposal) Of The Container - Pepperl+Fuchs KVF-O Manuel

OVERFLOW SENSOR KVF-O

Operation

4
4.1
EN
12 - EN
Operation

Emptying (Disposal) of the Container

The sensor is a sensitive component. Therefore always observe the following
safety information during emptying (disposal):
Caution!
Malfunction or damage through mechanical stress of the sensor.
In case of nonobservance, the safety and operation of the sensor or the entire
alarm system is not guaranteed.
Before emptying (disposal) the grease interceptor, remove the sensor from
■
the container.
Protect the sensor against impacts, knocks and unnecessary tensile forces in
■
the cable.
Insert the sensor in the grease interceptor only after it has been filled.
■