Omcan Santos 62 Instructions page 13

Modifying the safety mode connected with the hood lid:
"Pause" mode (by default).
While a cycle is running, opening the hood makes the motor stop but does not clear the key that is active.
When the hood is closed again, the cycle resumes.
Note: the current cycle will be de-activated if the sound-proofing hood remains open for more than 30 seconds.
"Quick stop" mode.
Opening the hood makes the motor stop and de-activates the key that was selected.
This code: "4 – P – 1" provides the means for switching from one mode to the other.
MAINTENANCE
Prior to carrying out any intervention on the appliance, it must be disconnected from the mains without fail.
This appliance requires no specific maintenance. The bearings are lubricated for life.
If any intervention is necessary to replace parts subject to wear, such as the bearing, blade, electrical or other
components, please refer to the parts list.
Whenever ordering spare parts:
• The type.
• The appliance serial number.
• The electrical specifications (16) given under the appliance.
Changing the drive system:
Motor drive (female):
Hold the motor drive (20) in position with multiple slip joint pliers, and unscrew the fixing screw (19) using a
Maintenance
19
20
13