Stalgast KG-1 Serie Notice D'instruction page 33

9710110
979511, 979513, 999511, 99513
9710130
9710110
Figure 6. Location of burners in the four-burner stove (schematically)
9710130
9710110
9710130
979611, 979613, 999611, 999613
Figure 7. Location of burners in the six-burner stove (schematically)
4. OPERATING INSTRUCTIONS
Before turning on the unit, make sure that it has been installed correctly and that its technical
condition allows for safe operation.
• Before using the stove, make sure that the upper parts of the burner (burner socket and flame ring) are
correctly positioned. The flame ring is fitted properly when the spring pin on the base surface of the socket
fits with the notch on the circumference of the flame ring. A different flame ring position in relation to the
socket is incorrect and will result in poor combustion of the gas at the burner.
• For the sake of rational energy consumption and proper combustion, it is advisable to use pots of an ap-
propriate diameter in relation to the heat load of the burner:
- for the 9kW burner, use of pots with diameters from 42 cm and higher is recommended
- for the 7kW burner, use of pots with diameters from 38 cm to 46 cm is recommended
- for the 5kW burner, using pots with diameters from 32 cm to 38 cm is recommended
- for 3.5kW burner, using pots with diameters from 28 cm to 32 cm is recommended
979521,979523, 999521, 999523
999541, 999543
9711110
9711130
9711110
9711130
9711110
9711130
9710210
979531, 979533, 999531, 999533
9710230
999551, 999553
9710210
9710230
9710210
9710230
979621, 979623, 999621, 999623
- 35 -
9710310
9710330
9711210
9710310
9711230
9710330
9710310
9710330
9711210
9711230
9711210
9711230