Hamilton Beach 14200 I64 Mode D'emploi page 6

840141100 ENv02.qxd
Features
Adjustable Steam Switch
This knob provides steam for fabrics
such as wool and linen. See the
"Fabric Setting Chart" for details. Set
the switch to Dry Iron
out steam.
Spray and Blast of Steam
Buttons
Push Blast Button for an extra blast of
steam. Do not press Blast Button more
than every 2 seconds. Push Spray
Button to release a fine spray of water
for difficult wrinkles in cotton or linen.
Auto Shutoff Reset Button/Light
This light comes on when the iron is
6
9/22/05 1:39 PM Page 6
(on selected models)
to iron with-
first plugged in.
After one hour, the
iron will shut off
and the light will
go out. Push the
Reset Button/
Light to turn the
iron back on.
Vertical Steam
1. Follow Steps 1 through 3 in
"To Steam Iron."
2. Turn Temperature Control Dial to
highest setting.
3. Hang garment in a location that is
not susceptible to damage from
heat or moisture. Do not hang in
front of wallpaper, window, or mirror.
4. Hold iron about 6 inches away from
5. To turn iron off, turn Temperature
Control Dial to OFF ( O ). Unplug
iron.
6. Empty water from the iron following
directions in "Caring for Your Iron."
NOTE: Do not allow hot soleplate to
touch delicate garments.
garment and
press and
release Blast
Button to steam
out wrinkles. Do
not press Blast
Button more
than once every
2 seconds.