Hamilton Beach 14200 I64 Mode D'emploi page 3

840141100 ENv02.qxd
Know Your Iron
Parts and Features
1. Power On Light or
Automatic Shutoff Reset
Button/Light
2. Spray/Blast Buttons (see inset)
3. Adjustable Steam Switch
(see inset)
4. Water Tank Opening
5. Spray Nozzle
6. Water Window
7. Temperature Control Dial
8. Soleplate
9. Heel Rest
10. Cord
Before First Use
• Steam vents should be cleaned
before first use.
• To clean steam vents before first use,
prepare iron for steam ironing, then
iron over an old cloth for a few min-
utes while letting the iron steam.
Press the Blast button several times
to clean the vents. Then follow the
Self-Cleaning instructions.
• During the first use of the iron, it may
appear to smoke. This will stop and
does not indicate a defect or hazard.
9/22/05 1:47 PM Page 3
Blast Spray
• Many irons spit or sputter during
the first few uses with tap water.
This happens as the steam chamber
becomes conditioned. This will
stop after a few uses.
CAUTION
Burn Hazard
• Metal surfaces on this iron are hot.
• Keep hands clear of metal surfaces
while operating.
3