Location Of Controls - JVC LT-19HA22U Mode D'emploi

Location of controls

LT-19.../LT-22...
1 3
Description of Indicators and Controls
1. Remote sensor
2. (Standby/On) indicator: The LED indicator lights up red in standby mode, and blue in the power
ON mode.
3. Loudspeakers
4. (Power)-button: Preparation: Connect power-cable to AC220~240V/50Hz. (LT-32...: turn on mains
switch (9).)
a) If standby-LED is red, you may power-off. To power-off, press power-button 1x and release.
For confirmation, standby-LED will change to dark. Power-on by remote control is not available.
b) If standby-LED is off, you may power-on. To power-on, press power-button 1x and release.
For confirmation, standby-LED will change to blue.
5. TV/AV/PC/ENTER button: Select input mode for TV/AV/COMPONENT/HDMI/PC. In Menu : Using as
ENTER button.
6. MENU button: To display the menu screen.
7. / /▲/▼ buttons: Press
change to a lower numbered channel set into memory. In Menu: Setting.
8. +/–/◀/▶ buttons / In Menu: Setting.
9. Mains switch (LT-32...) toggle switch on underside. Switch on/off power supply completely.
For complete disconnection from the mains power supply, remove the supplied power cable from the
socket.
2
8 7 6 5
to change to a higher numbered channel set into memory. Press
LT-26.../LT-32...
9 (LT-32...)
4
2
3
8 7
1
6 5 4
to
7