Rointe SYGMA BAS Serie Manuel D'installation Et D'utilisation page 29

EN
SYGMA BAS DIGITAL RADIATOR
3. Remove the template and carefully drill out the
marked holes.
4. Secure the upper brackets with the rawl plugs
and screws provided. Then fix the lower bracket. To
distinguish it, the lower bracket has a different design
from the top ones.
Top bracket
Bottom bracket
5. Slide the product up and down over the fixed
brackets.
6. Check the straightness with a spirit level and adjust
the supports accordingly if necessary.
7. Connect your product to the power supply and
switch it on.
8. See section 5 for operating instructions.
29