Electrical Connection; Programming - IFM Electronic efector 600 TAD 71 Serie Notice Utilisateurs

Electrical connection

The unit must be connected by a suitably qualified electrician.
The national and international regulations for the installation of
electrical equipment must be observed.
Voltage supply to EN50178, SELV, PELV.
Referring to UL: For use on a low voltage circuit with overcurrent
protection in accordance with UL873 Tab. 28.1 or Imax =
100/Ub (Ub = voltage of the circuit).
Disconnect power before connecting the unit as follows:
Connector view
(sensor)

Programming

Connect the sensor to a PC via the EPS-RS232 interface (order no.
E30066).
• The sensor is supplied with operating voltage by the interface,
• and transmits its data continuously via the interface: Current para-
EPS RS232 interface
Core colours of
ifm sockets:
1 = BN (brown),
2 = WH (white),
3 = BU (blue),
4 = BK (black).
PC
21