Bosch GPO 14 CE Professional Notice Originale page 19

OBJ_BUCH-1284-001.book Page 20 Tuesday, June 29, 2010 12:51 PM
20 | English
Never use the machine with a damaged ca-
ble. Do not touch the damaged cable and
pull the mains plug when the cable is dam-
aged while working. Damaged cables in-
crease the risk of an electric shock.
Products sold in GB only: Your product is fitted
with an BS 1363/A approved electric plug with
internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fit-
ted in its place by an authorised customer serv-
ice agent. The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.
Intended Use
The machine is intended for polishing and
brushing metal and coated surfaces as well as
for polishing stone without the use of water.
1 619 P09 071 | (29.6.10)
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Fastening screw for bow handle
2 Bow handle (insulated gripping surface)
3 Spindle lock button
4 Thumbwheel for speed preselection
5 On/Off switch
6 Grinder spindle
7 Auxiliary handle (insulated gripping surface)*
8 Clamping mandrel*
9 Clamping flange*
10 Buffing disc*
11 Clamping nut*
12 Spacer discs*
13 Polishing plate*
14 Round nut*
15 Lamb's wool bonnet for polishing plate*
16 Polishing sponge*
17 Lambskin polishing bonnet for polishing
sponge*
18 Rubber sanding plate*
19 Sanding sheet*
20 Felt polishing disc*
21 Cup brush*
22 Handle (insulated gripping surface)
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Bosch Power Tools