Publicité
Les langues disponibles
Les langues disponibles
1
3
4
1. Program indication lights - the indicator light of the selected washing program lights up.
2. Indicator lights
• Indicator light for rinse aid
up and you need to refill the rinse aid reservoir.
• Indicator light for softening salt
up and you need to refill the salt reservoir.
• Indicator light for faucet not opened
• Indicator lights delayed start - 2u 4u 8u.
3. On/off button
- when the on/off button is pressed the control lamp in the button Eco program lights up.
4. Program selection button P with indicator light - press the button repeatedly to select the desired washing program.
5. Delayed start button
The indicator light at the selected time lights up.
Press the button again after you have selected the 8 hour delay to cancel the delay time.
Press the Start/Pause button to activate the delayed time.
To select a different delay time, press the Start/Pause button and select a different delay time.
As soon as the delayed time has passed the corresponding indicator light goes out and the dishwasher will start the selected
washing program.
6. Start/ Pause button
1. Cup shelf
2. Cutlery basket
3. Basket
4. Spray arm
5. Filters
6. Control panel
7. Detergent and rinse aid reservoir
8. Salt reservoir
DESCRIPTION OF THE APPLIANCE
- the dishwasher checks if there is enough rinse aid available. If not, the control lamp lights
- the dishwasher checks if there is enough salt available. If not, the control lamp lights
- check the water supply when this indicator light lights up.
with indicator lights - press this button to delay the start of the program by 2, 4, 6 or 8 hours.
- press this button to start the program. The indicator light of the selected program will blink.
8
1
2
7
EN - 29
2
5
6
3
4 + 5
6
Publicité
