Publicité
Les langues disponibles
Les langues disponibles
Install Accessories
15. Install the Oil Tunnel {G} into recess support
near rear of hood. Refer to Figure 19.
16. Install Baffle Filters {H} and Stainless Steel
Spacers {I}.
back of hood.
until almost level.
recess behind the front of hood.
baffle filter.
resting position. Refer to Figure 20.
17. For Stainless Steel Spacer, follow above
steps.
Final Installation
18. Turn power ON in control panel. Check all
lights and fan operation.
19. Make sure to leave this manual for the
homeowner.
Angle baffle filter toward
Push the baffle filter up
Slide forward into
Slide back until it fits into
Figure 19
Lower
Figure 20
13
Publicité
